Electronic Enthusiast Arushi, recently launched IoTFi the Raspberry Pi RP2040 based 2G/4G IoT DIY Kit for Electronic Enthusiast & Makers, In the Collaboration with SB Components.
“SB Components is behind this project, The UK-based Hardware
Development Company is also Raspberry Pi Authorized Reseller & Raspberry Pi
Design Partner. SB Components helped several young makers to launch their
products as they offer a Sponsorship program to the young makers to make their ideas
into reality.”
IoTFi 2G / 4G DIY IoT Kit - Introduction
IoTFi is a complete DIY kit for the makers who want to build or explore 2G / 4G network, GSM /GPS, Basic electronics, and more. IoTFi comes with onboard SIM868/7600G, RP2040 powerful chip from Raspberry Pi & ESP-C3 – 32S Module is a Wi-Fi+ BLE combination of system-level chips (SoC), designed for various applications such as internet of things (IoT), mobile devices, wearable electronics, smart home, etc. IoTFi is loaded with powerful features. It is capable of transmitting and receiving messages to any device, calling GPS function, also IoTFi is well-equipped with a 3.5mm audio jack, a micro-SIM slot for SIM868/7600G, and an SD card slot with a Type C connector.
The well-equipped board has a high-resolution 1.14’’ LCD, an
accelerometer, and a Bluetooth 2.0 module, which enhances the board with a
user-friendly experience while running the applications.
This device is used for unlimited learning purposes with
unique features and ease-to-go performance.
IoTFi can amplify itself with incredible
specifications, and the package has one IoTFi board, GSM, and
GPS antenna. To explore more, IoTFi can be coded with many
programming languages, like Arduino, Python, and C/C++.
SIM868 GSM/GPRS+GNSS Module
It is accompanied by the main technical characteristics,
many more to highlight, like the SIM868 module. This
comprehensive Quad-Band GSM/GPRS module uses GNSS (GPS/GLONASS/BDS) satellite
navigation technology. It features a lot of interfaces, including UART, USB2.0,
GPIO, and so on, which also provides a lot of flexibility.
A small quad-band GSM/GPRS+GNSS module includes an LCC+LGA
form factor with great interfaces. IoTFi devices work on
low-power consumption with embedded TCP/UDP protocols and abundant software
functions like DTMF, MMS, and MUX. Multi-constellation GNSS receiver support
like GPS, GLONASS, BeiDou.
SIM868 GSM/GPRS+GNSS Module features
- Frequency Bands: 850/900/1800/1900MHz
- GPRS multi-slot class: 12/10
- Dimensions: 17.6*15.7*2.3mm
- Weight: 1.5±0.1g
- Supply Voltage: 3.4V ~ 4.4V
- Operation temperature: -40℃ ~ +85℃
- Compliant GSM phase 2/2+: Class 4 (2W @ 850/900MHz)
- Compliant GSM phase 2/2+: Class 1 (1W @ 1800/1900MHz)
- Control via AT commands (3GPP TS 27.007, 27.005 & SIMCom enhanced AT Commands)
- Low power consumption
- GPRS mobile station class B
SIM7600G LTE CAT-1 Module
SIM7600G is one of the series of SIM7600 and a
multi-band which is the LTE Cat 1 module that supports wireless communication
modes of LTE-TDD/ LTE-FDD/HSPA+/GSM/GPRS/EDGE. SIM7600G supports a maximum of
10Mbps downlink rate up to 5Mbps uplink rate.
The SIM7600G integrates multiple satellites with high
accuracy positioning GNSS systems, with multiple built-in network protocols,
and support drivers for main operating systems (USB for Windows, Linux,
Android, etc.).
The benefits of satellite navigation, or GNSS (Global
Navigation Satellite System), are all around us, and as communication quality
improves, people's lives improve as well. It may be used to trace goods, stolen
vehicles, and assets. Scientific research in meteorology, troposphere, and
geodesy has improved as a result of satellite communication, enhancing the
quality of the projects.
SIM7600G LTE CAT-1 Module Features
- LCC+LGA package.
- Downlink up to 10Mbps, Uplink up to 5Mbps.
- The AT commands of SIM7600G are mostly compatible with SIM7500/SIM7600 Series modules
- Supply voltage range: 3.4V ~ 4.2V, Typ: 3.8V
- Control Via AT Commands
- Operation temperature: -40°C to +85°C
- Dimensions: 30.0*30.0*2.9mm
- Weight: 5.7g
- LTE-FDD/LTE-TDD/UMTS/HSDPA/HSUPA/HSPA+/ GSM/GPRS/EDGE
IoTFi is a compact yet powerful board that is loaded with
some amazing features All-in-One device is capable of calling, transmitting
messages, MMS, Emails, GPS, and more.
IoTFi is currently available on Kickstarter and already reached its goal with 748% funded in a few hours of launch, currently, IoTFi 2G is available on Kickstarter at £45 & IoTFi 4G is Available at £105 for more visit the Official IoTFi product page.
